In this screen you can choose between several system and administration tools. Click on a link below to learn more.
Ĉi tiu ilo[26] ebligas al vi modifi la manieron kiel vi povas esti rekonita kiel uzanto de la maŝino aŭ en la reto.
Defaŭlte, informoj por via aŭtentikigo estas stokitaj en dosiero en via komputilo. Modifu ĝin nur se via reto -administranto invitas vin fari tion kaj doni informojn pri tio.
This page hasn't been written yet for lack of resources. If you think you can write this help, please contact the Doc team. Thanking you in advance.
You can start this tool from the command line, by typing drakxservices as root.
This tool[27] is present in the Mageia Control Center under the System tab. It allows you to manage the fonts available on the computer. The main screen above shows:
the installed font names, styles and sizes.
a preview of the selected font.
some buttons explained here later.
Akiru Vindozajn Tiparojn:
Ĉi tiu butono aŭtomate aldonas la tiparojn trovitajn en la Vindoza subdisko. Vi devas havi Microsoft Windows instalita.
Ebloj:
Ĝi permesas specifi la aplikojn aŭ aparatojn (presiloj plejparte) kapablaj uzi la tiparojn.
Malinstali:
Ĉi tiu butono devas forigi instalitajn tiparojn kaj eble konservi iun lokon. Atentu dum forigo de tiparoj ĉar ĝi povas havi gravajn konsekvencojn sur la dokumentoj, kiuj uzas ilin.
Importado:
Allows you to add fonts from a third party (CD, internet, ...). The supported formats are ttf, pfa, pfb, pcf, pfm and gsf. Click on the Import button and then on Add, a file manager pops up where you can select the fonts to install, click on Install when done. They are installed in the folder /usr/share/fonts.
If the newly installed (or removed) fonts doesn't appear in the Drakfont main screen, close and re open it to see the modifications.
Ĉi tiu ilo[28] troviĝas sub la langeto Sistemo en la Mageia Kontrolcentro etikedita "Administri daton kaj horon". En iuj labortablaj medioj ĝi ankaŭ haveblas per dekstra klako / Alĝustigu daton kaj Tempon ... sur la horloĝo en la sistempleto.
Ĝi estas tre simpla ilo.
Sur la supra maldekstra parto, estas la kalendaro. Sur la supra ekrankopio, la dato estas septembro (en la supra maldekstro), 2012 (en la supra dekstre), la 2-a (en blua) kaj ĝi estas dimanĉo. Elektu la monaton (aŭ jaron) alklakante la sagetojn ĉiuflanke de septembro (aŭ 2012). Elektu la tagon alklakante ĝian numeron.
Malsupre maldekstre estas la Reta Tempo-Protokolo sinkronigante, eblas havi horloĝon ĉiam ĝustatempe sinkronigante ĝin kun servilo. Kontrolu Ebligi Retan Tempoprotokolon kaj elektu la plej proksiman servilon.
Sur la dekstra parto estas la horloĝo. Estas senutile agordi la horloĝon se NTP estas ebligita. Tri skatoloj montras horojn, minutojn kaj sekundojn (15, 28 kaj 22 sur la ekrankopio). Uzu la sagetojn por agordi la horloĝon al la ĝusta horo. La formato ne povas esti ŝanĝita ĉi tie, vidu vian labortablan medion por tio.
Almenaŭ, malsupre dekstre, elektu vian horzonon alklakante la butonon kaj elektante en la listo la plej proksiman urbon.
Rimarko
Eĉ se ne eblas elekti daton aŭ horformaton en ĉi tiu ilo, ili aperos sur via labortablo laŭ la lokalizaj agordoj.
This tool[29] can be found in the System section of the Mageia Control Center (MCC) labelled "Manage localization for your system". It opens with a window in which you can choose your language. The choice is adapted to languages selected during installation.
The button give access to activate compatibility with old encoding (non UTF8).
The second window shows a list of countries according to the selected language. The button gives access to countries not listed.
You have to restart your session after any modifications.
In the Other Countries screen you can also select an input method (from the drop-down menu at the bottom of the list). Input methods allow users to input multilingual characters (Chinese, Japanese, Korean, etc).
For Asian and African locales, IBus will be set as default input method so users should not need to configure it manually.
Other input methods (SCIM, GCIN, HIME, etc.) also provide similar functions and can, if not available from the drop-down menu, be installed in another part of the Mageia Control Center. See la sekcio nomata “Software Management (Install and Remove Software)”.
This tool[30] is found in the Mageia Control Center System tab, labelled "View and search system logs".
First, enter the key string you want to look for in the Matching field and/or the key string you want to do not wish to see amongst the answers in the field but not matching. Then select the file(s) to search in the Choose file field. Optionally, it is possible to limit the search to only one day. Select it in the Calendar, using the little arrows on each side of the month and year, and check "". At last, click on the button to see the results in the window called Content of the file. It is possible to save the results in the .txt format by clicking on the Save button.
Rimarko
The houses the logs from the Mageia configuration tools such as the Mageia Control Center tools. These logs are updated each time a configuration is modified.
automatically checks the system load and the services every hour and if necessary sends an e-mail to the configured address.
To configure this tool, click on the Mail Alert button and then, in the next screen, on the drop down button. Here, all the running services are displayed and you can choose which ones you want to look watch. (See screenshot above).
The following services can be watched :
Webmin Service
Postfix Mail Server
FTP Servilo
Apache World Wide Web Server
SSH servilo
Samba Server
Xinetd Service
BIND Domain Name Resolve
In the next screen, select the Load value you consider unacceptable. The load represents the demand to a process, a high load slows the system down and a very high load may indicate that a process has gone out of control. The default value is 3. We recommend setting the load value to 3 times the number of processors.
In the last screen, enter the Email address of the person to be warned and the Email server to use (local or on the Internet).
This tool[31] gives you access to a console which is directly opened as root. We do not think that you need more information about that.
This tool[32] is found under the System tab in the Mageia Control Center labelled "Manage users on system"
The tool allows an administrator to manage the users and the groups, this means to add or delete a user or group and to modify user and group settings (ID, shell, ...)
When userdrake is opened, all the users existing on the system are listed in the tab, and all the groups in the tab. Both tabs operate the same way.
This button opens a new window with all fields shown empty:
The field Full Name is intended for the entry of a family name and first name, but it is possible to write anything or nothing as well!
Login is the only required field.
Setting a Password is highly recommended. There is a little shield on the right, if it is red, the password is weak, too short or is too similar to the login name. You should use figures, lower and upper case characters, punctuation marks, etc. The shield will turn orange and then green as the password strength improves.
Confirm Password field is there to ensure you entered what you intended to.
Login Shell is a drop down list that allows you to change the shell used by the user you are adding, the options are Bash, Dash and Sh.
Create a private group for the user, if checked will automatically create a group with the same name and the new user as the only member (this may be edited).
The other options should be obvious. The new user is created immediately after you click on .
2 Add Group
You only need to enter the new group name, and if required, the specific group ID.
3 Edit (a selected user)
: Allows you to modify all the data given for the user at creation (the ID can't be changed).
Account Info:
La unua eblo estas agordi finon de la konto. Rilato estas neebla post ĉi tiu dato. Ĉi tio estas utila por provizoraj kontoj.
The second option is to lock the account, connection is impossible as long as the account is locked.
It is also possible to change the icon.
Password Info: Allows you to set an expiration date for the password, this forces the user to change his password periodically.
Group: Here you can select the groups that the user is a member of.
Rimarko
If you are modifying a connected user account, modifications will not be effective until his/her next login.
4 Edit (with a group selected)
Group Data: Allows you to modify the group name.
Group Users: Here you can select the users who are members of the group
5 Forigi
Select a user or a group and click on Delete to remove it. For a user, a window appears to ask if home directory and mailbox must also be deleted. If a private group has been created for the user, it will be deleted as well.
Averto
Eblas forigi grupon, kiu ne estas malplena.
6 Malŝarĝi
La Uzanta datumbazo povas esti ŝanĝita ekster Userdrake. Alklaku ĉi tiun ikon por refreŝigi la ekranon.
7 Gastiga Konto
gasto estas speciala konto. Ĝi estas intencita doni iun provizora aliro al la sistemo kun totala sekureco. Salutnomo estas plej malgranda, ne ekzistas pasvorto, kaj estas neeble fari modifojn al la sistemo de ĉi tiu konto. La personaj dosierujoj estas forigitaj ĉe la fino de la kunsido. Ĉi tiu konto estas ebligita defaŭlte, por malŝalti ĝin, alklaku la menuon en .
This tool[33] is found under the System tab in the Mageia Control Center labeled Import Windows(TM) documents and settings
The tool allows an administrator to import the user documents and settings from a Windows® 2000, Windows® XP or Windows® Vista™ installation on the same computer as the Mageia installation.
Averto
Please note that all the changes will be applied by transfugdrake immediately after pressing .
After starting transfugdrake you will see the first wizard page with some explanation about the tool and import options.
As soon as you read and understand the instructions, press the button. This should run a detection of Windows® installation.
When the detection step is complete you will see a page which allows you to choose accounts in Windows® and Mageia for the import procedure. It is possible to choose other user account than yours own.
Rimarko
Please take into account that due to migrate-assistant (the backend of transfugdrake) limitations Windows® user account names with special symbols can be displayed incorrectly.
Rimarko
Migration may take some time depending on the size of the document folders.
Averto
Some Windows® applications (especially drivers) may create user accounts for different purposes. For example, NVidia drivers in Windows®are updated using UpdatusUser. Please do not use such accounts for the import purposes.
When you finished with the accounts selection press button. The next page is used to select a method to import documents:
Transfugdrake is designed to import Windows® data from My Documents, My Music and My Pictures folders. It is possible to skip import by selecting the appropriate item in this window.
When you finished with the document import method choosing press button. The next page is used to select a method to import bookmarks:
Transfugdrake can import Internet Explorer and Mozilla Firefox bookmarks into the bookmarks of Mageia Mozilla Firefox instance.
Choose the preferred import option and press the button.
La sekva paĝo permesas al vi importi labortablajn fonon:
Choose the preferred option and press the button.
The last page of wizard shows some congratulation message. Just press the button.
This tool[34] is available in MCC's System tab, in the Administration tools section.
When you start this tool in MCC for the first time, you will see a message about installing draksnapshot. Click on to proceed. Draksnapshot and some other packages it needs will be installed.
Click again on Snapshots, you will see the Settings screen. Tick Enable Backups and, if you want to backup the whole system, Backup the whole system.
If you only want to backup part of your directories, then choose Advanced. You will see a little pop-up screen. Use the and buttons next to the Backup list to include or exclude directories and files from the backup. Use the same buttons next to the Exclude list to remove subdirectories and/or files from the chosen directories, that should not be included in the backup. Click on when you are done.
Now give the path to Where to backup, or choose the button to select the correct path. Any mounted USB-key or external HD can be found in /run/media/your_user_name/.
Click on to make the snapshot.
[26] Vi povas komenci ĉi tiun ilon el la komandlinio, tajpante drakauth kiel radiko.
[27] You can start this tool from the command line, by typing drakfont as root.
[28] Vi povas komenci ĉi tiun ilon de la komandlinio, tajpante drakclock kiel radikon.
[29] You can also start this tool from the command line, by typing localedrake as root.
[30] You can start this tool from the command line, by typing logdrake as root.
[31] You can start this tool from the command line, by typing drakconsole as root.
[32] You can start this tool from the command line, by typing userdrake as root.
[33] You can start this tool from the command line, by typing transfugdrake as root.
[34] You can start this tool from the command line, by typing draksnapshot-config as root.
